Artis Opus is proud to present our new Painting Handle!With so many handles already in existence, we've taken our time to try and release what we think is the perfect painting handle solution for you to enjoy the hobby!Whilst these handles providing the perfect beautiful plinth to place down and sit back to survey your progress, we didn't expect that they would be so motivating to pick back up and start painting again!Our initial release will have a range of three handles - Small (Hen), Medium (Duck) and Large (Goose). Fun fact! These handles share the same dimensions of the actual average bird eggs! Borrowing these wonderful dimensions from nature resulted in an unmatched level of ergonomics; these really feel at home in your hand! To cater for differing levels of accessibility and hand sizes, these three sizes offer control for what you think would fit your hand the best.
What's included in the package?- 1x Painting Handle Egg (in your chosen size)- 1x Regular cork - 1x Magnetised cork- 1x metal disc pre-fitted with double sided tape, that fits a 28mm base perfectly,What about extras?In testing, we've found that painters have numerous requirements for how they would best like to paint. Moving between models quickly? Perhaps multiple handles suit you best... Batch painting 20x minis? I like to use one handle with the magnet cork, and fix metal plates to the 20 minis to quickly swap between them... so we're also releasing some accessories to add to your handle which are as follows:
- 5x Regular corks, available in S, M & L- 5x Magnetised corks, available in S, M & L- 10x Metal discs (prefitted with double sided tape)Curious to know about the product development? Here's the story...What if miniature holders were designed for holding..?
When we started on the journey of making our model holders two years ago we felt that this was the only question we needed to answer, having not found something to our liking out there we disregarded the options available on the market.
We bought a lathe, Byron swiftly broke a pillar drill in record time (drill press, American brothers <3), and we started making prototypes out of stacked high-grade birch ply (something which we know and love).
Two options were swiftly ruled out: ‘screwdriver’ handles (minis aren’t screwdrivers), and ‘shot glass’ shaped things (minis don’t ‘spill’, and being able to moving them about is very important for getting the right angle).
We definitely didn’t want something precarious, especially once a mini is added to the top it’s easy for something to become top-heavy.
Finally, and of great importance we felt that anyone with big hands has been largely overlooked.
What did this leave?
What’s nice to hold, comes in different sizes, and feels solid? Pebbles! There was no disagreement on how a nice pebble (of whatever size matched) felt in the hand, we needed something symmetrical though, and easy to hold, it was at this point the ‘what about an Egg’ jokes began.
Little did we know we’d almost arrived at our final design… We just had to work out how to make this from wood, whilst conveniently holding a mini/part.
Attaching your miniature?
We didn’t feel there was too much need to re-invent the wheel here, many of you will paint your minis on corks, magnetized, pinned, or tack’d. Asides from the corks being a bit blocky at the bottom them making up the material the mini attached to was unanimously agreed to be a good idea. We wanted to work out some efficient methods for the batch-painters out there, and whenever possible we wanted changing/swapping to be a 1-1.5hand procedure (we don’t like putting our brushes down).
Corks kept on getting stuck though (it’s what they’re designed to do) 😅😅😅
It was at this point after some discussion Byron started exploding current and previous prototypes, attempting to hollow them out, and we had to make the difficult decision to leave our beloved plywood behind… Time to build casting facilities, eek.
Casting in house?!
With no little-effort casting was learned, and experimenting begun. With a lot of tweaking and consideration the Eggs as we now know them rapidly took form, and took on a life of their own. With this added flexibility we played with finish (including literally copying eggshell), but swiftly realized that you must be able to turn your holder easily, just like your brush. Satin-gloss was settled upon, hollow (slightly wider/narrower options depending on which way ‘up’ it was used), and we only had one task remaining.
What about the Army Painters out there?
Confident that we’d made a fantastic option for ‘fancy’ painting, and a shape (size-depending) that would work for everyone we looked to science for a bit of help. Army painting requires a lot of swapping and switching, and while we may end up with 5 of our favourite Egg size on our desk eventually we needed to work out a set-up for those of you with infantry blocks to batch-paint.
Enter-magnets 🧲🧲🥰
Cork inserts with magnets are available! Corks can be popped out from below with a thumb (without even needing to drop your brush!), and figures easily swapped over, a ferrous disc come with each holder, and is available separately. Backed with ultra-sticky high-grade double-sided tape the disks fit perfectly under/inside 28mm GW bases, a strong, but not too-strong bond holds it there perfectly. Your mini can be spun on the magnet, without it coming off.
If your miniatures are already magnetized you can put the disc on the cork, and use that to hold your minis. You can also put a magnet-cork in the bottom of your holder, and use that to keep your minis attached to any metal tray/ruler/surface on your desk to avoid things falling over!We hope you'll enjoy using your new handle for many years to come!Here are some specifications:Small (Hen)Handle - 47mm (tall) x 39mm (widest point)Cork - 23.5mm (tall) x 19mm (widest point)Weight - 46g (w/cork), 42g (bare)
Medium (Duck)
Handle - 57mm (tall) x 46mm (widest point)Cork - 32mm (tall) x 25.5mm (widest point)Weight - 64g (w/cork), 60g (bare)Large (Goose)Handle - 65mm (tall) x 54mm (widest point)Cork - 32mm (tall) x 30mm (widest point)Weight - 96g (w/cork), 88g (bare)
Artis Opus is proud to present our new Painting Handle!With so many handles already in existence, we've taken our time to try and release what we think is the perfect painting handle solution for you to enjoy the hobby!Whilst these handles providing the perfect beautiful plinth to place down and sit back to survey your progress, we didn't expect that they would be so motivating to pick back up and start painting again!Our initial release will have a range of three handles - Small (Hen), Medium (Duck) and Large (Goose). Fun fact! These handles share the same dimensions of the actual average bird eggs! Borrowing these wonderful dimensions from nature resulted in an unmatched level of ergonomics; these really feel at home in your hand! To cater for differing levels of accessibility and hand sizes, these three sizes offer control for what you think would fit your hand the best.
What accessories are available?In testing, we've found that painters have numerous requirements for how they would best like to paint. Moving between models quickly? Perhaps multiple handles suit you best... Batch painting 20x minis? I like to use one handle with the magnet cork, and fix metal plates to the 20 minis to quickly swap between them... so we're also releasing some accessories to add to your handle which are as follows:
- 5x Regular corks, available in S, M & L- 5x Magnetised corks, available in S, M & L- 10x Metal discs (prefitted with double sided tape)Curious to know about the product development? Here's the story...What if miniature holders were designed for holding..?
When we started on the journey of making our model holders two years ago we felt that this was the only question we needed to answer, having not found something to our liking out there we disregarded the options available on the market.
We bought a lathe, Byron swiftly broke a pillar drill in record time (drill press, American brothers <3), and we started making prototypes out of stacked high-grade birch ply (something which we know and love).
Two options were swiftly ruled out: ‘screwdriver’ handles (minis aren’t screwdrivers), and ‘shot glass’ shaped things (minis don’t ‘spill’, and being able to moving them about is very important for getting the right angle).
We definitely didn’t want something precarious, especially once a mini is added to the top it’s easy for something to become top-heavy.
Finally, and of great importance we felt that anyone with big hands has been largely overlooked.
What did this leave?
What’s nice to hold, comes in different sizes, and feels solid? Pebbles! There was no disagreement on how a nice pebble (of whatever size matched) felt in the hand, we needed something symmetrical though, and easy to hold, it was at this point the ‘what about an Egg’ jokes began.
Little did we know we’d almost arrived at our final design… We just had to work out how to make this from wood, whilst conveniently holding a mini/part.
Attaching your miniature?
We didn’t feel there was too much need to re-invent the wheel here, many of you will paint your minis on corks, magnetized, pinned, or tack’d. Asides from the corks being a bit blocky at the bottom them making up the material the mini attached to was unanimously agreed to be a good idea. We wanted to work out some efficient methods for the batch-painters out there, and whenever possible we wanted changing/swapping to be a 1-1.5hand procedure (we don’t like putting our brushes down).
Corks kept on getting stuck though (it’s what they’re designed to do) 😅😅😅
It was at this point after some discussion Byron started exploding current and previous prototypes, attempting to hollow them out, and we had to make the difficult decision to leave our beloved plywood behind… Time to build casting facilities, eek.
Casting in house?!
With no little-effort casting was learned, and experimenting begun. With a lot of tweaking and consideration the Eggs as we now know them rapidly took form, and took on a life of their own. With this added flexibility we played with finish (including literally copying eggshell), but swiftly realized that you must be able to turn your holder easily, just like your brush. Satin-gloss was settled upon, hollow (slightly wider/narrower options depending on which way ‘up’ it was used), and we only had one task remaining.
What about the Army Painters out there?
Confident that we’d made a fantastic option for ‘fancy’ painting, and a shape (size-depending) that would work for everyone we looked to science for a bit of help. Army painting requires a lot of swapping and switching, and while we may end up with 5 of our favourite Egg size on our desk eventually we needed to work out a set-up for those of you with infantry blocks to batch-paint.
Enter-magnets 🧲🧲🥰
Cork inserts with magnets are available! Corks can be popped out from below with a thumb (without even needing to drop your brush!), and figures easily swapped over, a ferrous disc come with each holder, and is available separately. Backed with ultra-sticky high-grade double-sided tape the disks fit perfectly under/inside 28mm GW bases, a strong, but not too-strong bond holds it there perfectly. Your mini can be spun on the magnet, without it coming off.
If your miniatures are already magnetized you can put the disc on the cork, and use that to hold your minis. You can also put a magnet-cork in the bottom of your holder, and use that to keep your minis attached to any metal tray/ruler/surface on your desk to avoid things falling over!We hope you'll enjoy using your new handle for many years to come!Here are some specifications:Small (Hen)Handle - 47mm (tall) x 39mm (widest point)Cork - 23.5mm (tall) x 19mm (widest point)Weight - 46g (w/cork), 42g (bare)
Medium (Duck)
Handle - 57mm (tall) x 46mm (widest point)Cork - 32mm (tall) x 25.5mm (widest point)Weight - 64g (w/cork), 60g (bare)Large (Goose)Handle - 65mm (tall) x 54mm (widest point)Cork - 32mm (tall) x 30mm (widest point)Weight - 96g (w/cork), 88g (bare)
LOADED WITH COOL FEATURES!
Protect your desk with the Redgrassgames cutting and painting mat for miniature painting. This custom-made painting mat comes in a neutral gray to help you focus on your painting session. Available in A3 format, it includes just the right amount of useful guides. Round and square checkers, dilution ratios for beginners, an inch/cm ruler, and the Redgrass color wheel! It is also your ideal cutting mat for all your hobbies. Self-healing but also double-sided, it will serve you a long time.
Color Wheel Included
Primary, Secondary, Tertiary. Made with beginners in mind, with the optional Redgrass color wheel, colors will hold no secrets from you. It is a great instrument for teachers and advanced painters alike.
Optimized For Miniature Painting
Focus on your painting thanks to its large neutral gray area. Printed with only essential information such as square and round base checker, a beginner's dilution ratio guide and an inch/cm ruler.
Self Healing
Not magic but tech. The Redgrass painting mat is cut-resistant. It will resist hobby knives, cutters, or scalpels for a long time.
Double-Sided
This anti-slip, neutral gray painting mat is printed on both sides. Double the service life of your painting and cutting mat.
SHARPER THAN YOU THINK:
Extremely sharp single edge
Great cutting capacity
For plastics. NOT for metal!
Don’t exceed max 3mm
Keep the tool dry
Cover the tip with the plastic cap to protect the blade
Blade lightly coated in oil to keep the tool in prime condition (should be wiped off before use)RGG precision nippers have been carefully selected for their superior ability to remove miniature plastic components and scale model plastic parts from their sprues with the cleanest of cuts. With our clippers, clean up will be minimal. The sharp, angled blade makes removing plastic models off their sprues a real joy.
Made for miniatures and more
Redgrass games sprue clippers are just as adept at sci-fi and fantasy wargaming plastic models as they are with train, plane, and warship modelling. Any scale modeller can benefit from using RGG Precision Nippers during their plastic model assembly process.
Well designed
The custom spring mechanism and soft ergonomic grips make using the RGG Precision Nippers just as easy on your hands as well as the plastic kit. You can use these for extended periods of time without fear of strain or fatigue
The New Flexible File Set 10-Pack from Game Envy includes 10 precision hobby files in 5 different grits, giving you the complete range needed for cleaning mould lines, sanding resin and plastic parts, and achieving smooth finishes on your miniatures. The flexible design conforms to curved surfaces for more precise results.Contents: 10 flexible files, 5 grits (2 of each). Suitable for resin, plastic, and metal.
These stainless steel precision tweezers are versatile and precise, while maintaining a comfortable feel.Keep out of the reach of children under 10 years of age to prevent risk of injury caused by sharp points.
Premium Lasting Quality
Extremely sharp edge
Made from Premium Stainless Steel
For plastics (PS, PP, ABS, PE) and resins
Do not exceed max 3mm
Comes with a protective cap for optimal safety
Crafted for Versatility. Built to Last.
Made to last, the Redgrass Sprue Cutters are designed to remove miniature and scale model parts from sprues.The Redgrass Sprue Cutters are the perfect combination between versatility and durability. They will serve you for years with proper care!
Painting handle at its best. RGG 360° (design patent) is the only natural ergonomic miniature holder designed to create the best connection between you and your miniature, help you adopt the best painting position and minimize unnecessary movements.
All your miniature painting needs in one ergonomic handle
Acclaimed by professionals and used by tens of thousands of miniature painters worldwide, the RGG360° Painting Handle is now available in its Definitive Edition
Natural ergonomic painting handle
The RGG 360° is the only natural ergonomic handle designed to help you adopt the best painting position, and minimize unnecessary movements. Stay focused for longer without strain.
One painting handle, many paint jobs
You can paint multiple miniatures with just one holder. It has never been easier to swap your projects on the go. Perfect for batch painting. Save desk space. (additional caps sold separately
Improved stabilitySecure your WIP miniature between painting sessions thanks to the strong magnet inside the holder.Innovative 360° rotationRGG 360° handle allows you to rotate your miniature but in a controlled action. Doesn't spin freely. You don’t need to hold it in place with your thumb. Designed with a tight axle mechanism that will last for years.The choice of Pro-painters
Used by pro-painters and youtubers all over the world such as world famous painter Angel Giraldez. RGG360 is one of the most acclaimed miniature holders available.
Versatility at your fingertips
With the RGG360° painting handle, versatility is key. Whether it's swappable caps for small miniatures, XL caps for larger figures, or even cork inserts for sub-assemblies, this single handle accommodates it all.
Versatility at your fingertips
With the RGG360° painting handle, versatility is key. Whether it’s swappable caps for small miniatures, XL caps for larger figures, or even cork inserts for sub-assemblies, this single handle accommodates it all. Embrace the full spectrum of your miniature painting needs with just one RGG360°.
The Vallejo Diamond Needle File Set contains 5 precision diamond-coated files — flat, square, round, half-round, and triangle — each 140 mm long. Diamond files stay cooler during use, do not clog, and last significantly longer than conventional steel files. They cut faster and more cleanly on both plastics and metals, making them the upgrade pick for serious modelers who do a lot of assembly and cleanup work.Contents: 5 × 140 mm diamond needle files (flat, square, round, half-round, triangle). Vallejo Hobby Tools (T03002).
Keep your Exemplar PRO Wet Palette performing at its best with Game Envy's Premium Wet Palette Paper Refill Pack. Engineered with an advanced parchment blend for superior moisture regulation, this paper keeps paints fluid and usable longer without diluting them, enabling perfect mixing and blending. Sheets are reusable after rinsing. Sized specifically for the Exemplar PRO.Contents: 50 sheets of Premium Wet Palette Paper. Compatible with: Game Envy Exemplar PRO.
Paint Knife- the easy way to apply texture and crackle paste
This purpose designed tool makes spreading your texture and crackle paste quick and simple. The flat trowel allows for scooping and the small tip helps to get the paste into small crevices, between feet, and around ground details.
Modeling compound can be used to sculpt custom parts for your miniatures, fill remaining gaps after assembly, or to smooth out manufacturing defects.Trim a piece from the strip, then mix the yellow and blue parts together until you get a consistent green color. Wet your fingers with water to prevent sticking.
Alien flytraps (named after the earth Dionaea plants) are giant, bright-blue, glowing, carnivorous plants that become reddish-brown and poisonous with maturation. They are great to bring a sense of danger and beauty to your scenes.
This sheet contains 52 different colored and sized Alien Flytrap leaves for your scale models, hobby figures and scenic dioramas.
The Vallejo Needle File Set contains 10 medium-cut files in assorted profiles, stored in a handy wallet for easy transport and organization. These files are excellent for general modeling work — removing mold lines, cleaning flash, and smoothing surfaces on resin, plastic, and metal parts before priming and painting.
Contents: 10 × medium-cut needle files in assorted profiles, with storage wallet. Vallejo Hobby Tools (T03001).
Revisit Lost Temple, one of StarCraft's most iconic maps, on your tabletop. The box holds enough walls and scatter terrain for a 1,000-mineral game.Contents: 15 terrain pieces, 1 cloth playmat, assembly manual. Terrain expansion for StarCraft: Tabletop Miniatures Game by Archon Studio. Hard plastic terrain, unpainted — assembly required. Not recommended for children under 14.
Blood Bowl Sevens is a faster, smaller-scale version of Blood Bowl, well suited to shorter games and to introducing new coaches to the sport. Experienced players can often complete a match in under an hour.Includes a double-sided fold-out Sevens pitch (Astrogranite on one side, grass on the other) and a pair of matching double-sided dugouts with trackers for score, turns and re-rolls, plus areas for Reserves, Knocked-out players and Casualties. Thick card pitch measures 702mm x 396mm with reinforced folds; each dugout measures 234mm x 99mm. Sevens rules are in Blood Bowl Spike! Journal Issue 22.
The underhive is a brutal and chaotic environment, and no two conflicts between gangs are quite the same. Taking place in different territories, with a variety of objectives, circumstances can change in a flash – stay on your toes if you want to survive.This pack contains 52 cards to help you set up and play thrilling games of Warhammer Necromunda Skirmish. Simply generate a Territory and a Scenario, and you're ready for a scrap. The included reference cards will help with your pre- and post-battle sequences, the skills your Specialists gain, and the rewards gained during a campaign. It's a simple way to get playing quickly, so you can get straight to the action.This pack includes the following cards:– 22 Territory cards: 18 Territories, 4 Settlements– 24 Scenario cards: 6 Objective cards, 6 Deployment cards, 6 Side Jobs cards, 6 Crew Selection cards– 6 Reference cards: 4 Skills cards, 1 Pre-battle and Post-battle sequence card, 1 card detailing the rewards granted in both the Occupation and Takeover Phases of a campaignAll cards measure 75mm by 110mm.You will need a copy of Necromunda Skirmish: Core Rulebook to use these cards in games of Warhammer Necromunda Skirmish.
